Manufactures	Mircom
Origin	Canada
Standards	UL, FM Approval
Number of Loop	One addressable (SLC) loop with a maximum of 240 MGC devices (MIX-4000 series) in total.
Display	– 4 x 20 LCD display — 80 characters total – LED Indicators for AC On, CPU Fault, and Ground Fault
Standard Features	Main Board, Power Supply and Backbox
	Flexible zones and group configuration options allowing for grouped inputs and outputs.
	Compatible with MGC devices (MIX-4000 Series) including photoelectric duct smoke detector and multi-modules.
	Device sub-addressing which saves physical address space for multi modules, sounder bases, relay bases and dual input module.
	Compatible with conventional detectors using MGC MIX- 4042 Conventional Zone module, refer to document LT-1023 for compatible detectors.
	Class A (DCLA), Class X (DCLC), or Class B (DCLB) analog loop(s).
	Four Power Limited Class B, Class A NAC circuits (max 1.5 Amps each – 5.0 Amps total).
	NAC circuits may be configured as silenceable signal, non-silenceable signal, silenceable strobes, non-silenceable strobes, or auxiliary power output. The audible signal may be Steady, Temporal Code, California Code, or March Time.
	Supports sync strobe protocols from major manufacturers.
	USB port on core board for simple programming and firmware upgrade by local keypad or PC.
	Dedicated common alarm, supervisory, trouble, and auxiliary alarm relays.
	Additional outputs include connections for a RTI remote trouble indicator, PR-300 Reverse Polarity Module, an RS-485 bus for connection of up to seven RAX-LCD-LITEs, RAM-3318-LCDs, SRM-312s and RA-1000 Series annunciators.
	Built-in POTs dialer which allows for the reporting of events to a monitoring facility. The UDACT/Digital Communicator can be configured for single or dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID protocols.
	Full Windows 10 compatibility
	Bypass modules IPS-2424DS and IPS-4848DS can be used when connected to this panel as remote annunciators. These modules are mounted into a series of enclosures and connected to the RAM-3318-LCD.
	Two event history logs comprised of a 400 event alarm log for alarm related events and a 400 event general log for all other events
	Buzzer Silence can be repurposed as Auxiliary Reset
	The addressable devices will not flash their LEDs when no flashing flag is enabled.
	No Flashing flag is re-purposed to indicate the device will not flash its LED.
	Support 4-20mA functionality on the MIX-4042 module.
	Support Auto Suite Silence.
	Buzzer Silence can be repurposed as Auxiliary Reset.
	Dual relay module to operate independent relays .
	Group bypass switch
Input Voltage	120VAC 60Hz / 240VAC 50Hz 1.81 Amp / 0.98 Amp (primary)
Battery Type	24VDC Gel Cell / Sealed lead acid
Operating Temperature	32ºF to 120ºF (0ºC to 49C)
Humidity	10% – 93% non-condensing
Dimensions	16.7″ W x 5.7″ D x 23″ H (42.42xm x 14.48 x 58.42cm)
Weight (g)	Depending on the number of module on the cabinet

Mircom FleX-Net FX-4000

Mircom FleX-Net FX-4000

Sales Commitments

SAI GON - HQ

Da Nang Office

Ha Noi Office

EMAIL US

PHONE NUMBER

LOCATION

Mircom FleX-Net FX-4000

Mircom FleX-Net FX-4000

Sales Commitments

Related products

SAI GON - HQ

Da Nang Office

Ha Noi Office

Contact Us For Quotation And Support

EMAIL US

PHONE NUMBER

LOCATION