- Re-designed lens and improved module construction delivering bright, even light for visibility from further distances.
- Re-engineered, completely enclosed sound module, maintains substantial water and dust protection while producing loud, omnidirectional sound. (LR5 12V DC: 80dB LR4 & LR5: 85dB, LR6: 88dB, LR7: 90dB at 1m)
- A modular, Twist and Lock design to easily customize and field configure LED units and sound modules.
- A sleek, smooth form factor and a rugged body construction for performance in harsh environments, carrying an IP65 protection rating.
- Rated voltage: 24V DC.
- Standard body color: Off-white. Silver and black bodies are available as components only.
- Body unit with terminal block available as a component in off-white, silver, or black (LR7-WT & LR7-KT).
- Four mounting options: Direct, pole with L-bracket, pole with circular bracket, and pole with folding bracket (Off-white only).
Specifications
| Operating Ambient Temperature | -20? ~ +50? |
| Operating Ambient Humidity | Less than 90% (No condensation) |
| Storage Temperature Range | -30? ~ +60? |
| Storage Humidity Range | Less than 90% (No condensation) |
| Mounting Location | Indoor Only |
| Mounting Direction | Upright |
| Protection Rating*1 | IP65(IEC 60529) / NEMA TYPE 4X, 13 |
| Environmental Condition | Upright Position |
| Insulation Resistance | More than 1M? at 500V DC between live part and non-current-carrying metallic part |
| Withstand Voltage | 500V AC applied for 1min between live part and non-current-carrying metallic part without breaking insulation |
| Flashing Rate | 60? 2 Flashes Per Minute |
| Sound Pressure Level | LR7: Typical 90dB |
| Sound Reduction*2 | Approx. -10dB |
| Environmental Condition | Buzzer sound No.4(Sweep) was measured from the total circumference of the Buzzer Unit at 1m |
| Buzzer Sound | 4 patterns*2 No.1: Rapid Intermittent Beep / 3378? No.2: Continuous Beep Sound / 3378? No.3: Rapid Hi-Lo / 2016? & 3012? No.4: Sweep Sound / 1000Hz – 4032Hz |
| Transistor Output | NPN / PNP |
| Conformity Standards |
|
*1 LJ Type is IP54
*2 Dependent on DIP Switch Settings
*3 Except KT, Assembly Model WT
LED Unit Specifications
| Color | Red | Amber | Green | Blue | White | |
|---|---|---|---|---|---|---|
| Signal Wire Current (Per Unit) / Rated Power Consumption (Per Unit) | Typ. | 40mA / 1W | ||||
| Max. | 45mA / 1.3W | |||||
Buzzer Unit Specifications
| Signal Wire Current (Buzzer Unit) / Rated Power Consumption (Buzzer Unit) | Typ. | 40mA / 1W |
| Max. | 250mA / 1.3W |
Tiếng Việt


Đánh giá và bình luận
There are no reviews yet.